Canon imageClass DL370 Starter Manual

Also see for imageClass DL320: Basic operation guide

Contents

Canon imageClass DL370 Starter Manual Manual pdf 32 page image

A-3A-3Checking the IP AddressCheck the network operation.Press [ ] or [ ] to select,and then press [OK].Press [ ](Status Monitor/Cancel).Press [ ] or [ ] to select,and then press [OK].Press [ ] or [ ] to select,and then press [OK].Check the IP address. Press [ ] (StatusMonitor/Cancel) toclose the screen.Enter "http:///" in the address field, and thenpress the [ENTER] key on your keyboard.Start the web browser of acomputer which is connectedto a network.Check that the screen of the Remote UI is displayed.When the Remote UI is not displayedCheck the following.• Whether the computer and hub are connected using a LAN cable• Whether is set to e-Manual "System Settings"IP Address192.168.0.225The is theaddress checked in Step .Input Example: http://192.168.0.215/When the machine is connected to a switching hubYou may not be able to connect the machine to a network eventhough your network settings are appropriate. Delaying themachine's network startup time may solve the problem.e-Manual "Specifying the Wait Time until the Machine Connectsto a Network"Status Monitor/CancelTX JobRX JobFax Forwarding Erro...Network InformationNetwork InformationIPv4IPv6IEEE802.1X Error Inf...IPv4IP AddressSubnet MaskGateway AddressHost Name If the IP address displayed on the screen isbetween "169.254.1.0 and 169.254.254.255"This IP address is the one assigned by the AutoIP function.If an IP address other than link-local addresses is set for thecomputer, set an IP address in the same subnet as the computer(other than link-local addresses) also for this machine manually.This enables the installer to search for this machine.e-Manual "Setting IPv4 Address"