1234567891011Back NextPreviousTOP10-32Before Using theMachineDocument and PaperCopyingSending and Receiving (MF6595cx/MF6595/MF6590 Only)Printing andScanningNetwork (MF6595cx/MF6595/MF6590/MF6540 Only)Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsCopying ProblemsBlank paper comes out from the machine.Have you removed the plastic seal from the tonercartridge?Make sure you remove the seal from the cartridge.(See “Set Up the Machine,” in the Starter Guide.)Is the toner cartridge installed properly?Make sure the toner cartridge is installed properly.(See “Set Up the Machine,” in the Starter Guide.)Make sure the left cover is fully closed.Is the document loaded correctly?Make sure the document is correctly loaded. (See“Loading Documents,” on p. 2-4)QAQAAQAIs the cartridge out of toner?Replace the toner cartridge. (See “Replacing the TonerCartridge,” on p. 9-13.)Does the document meet the requirements for themachine?Make sure you load documents that meet therequirements for use. (See “Document Requirements,”on p. 2-2.)Copy is too light or has uneven density.Is the toner low or unevenly distributed?Redistribute the toner inside the toner cartridge. Ifthe problem persists, replace the toner cartridge. (See“Replacing the Toner Cartridge,” on p. 9-13.)QAQAQA