13Connecting to the Computer Are the computer and the router (or hub) properlyconnected using a LAN cable?For details, see the instruction manual provided with yournetwork device, or contact the manufacturer.Have the network settings on the computer beencomplete?If the computer is not properly configured, you may notuse the wired LAN connection even after completing thefollowing settings.NOTE• You cannot connect both the wired LAN and wirelessLAN at the same time.• When you connect to a network environment thatis not security protected, your personal informationcould be disclosed to third parties. Please usecaution.• If you connect through a LAN in the office, contactyour network administrator.If the IP address on this machine has been changed:If the machine is on the same subnet as the computer,the connection is maintained.* If you want to manually configure the IP address:If you have set a static IP address to the IP address of thecomputer, manually configure a static IP Address."Setting the IP Address" in the e-ManualWait for approximately 2 minutes.The IP address will be automatically configured.*Router(or Hub)LAN CableInternet RouterLAN Cable1 Wired LAN ConnectionCheck the following first.2 Wired LAN ConnectionConnect the LAN cable.The machine does not come with a LAN cable, router, or a hub. Have LAN Cable of Category 5 twisted pair cable orhigher ready.Preface Installing the Machine21Connecting to a Computer and Installing the Drivers3Configuring and Connecting the Fax4WindowsWindows