Canon imageCLASS 2300 Setup

Also see for 2300N - ImageCLASS B/W Laser: Copying guide Specifications Basic guide Printer guide Reference guide

Contents

Canon imageCLASS 2300 Setup Manual pdf 5 page image

LTRU2 U3B5 LGLA5A4A4A3U1B4 LTRSTMTB5 11X17 LTRUnlockLock3 Detach the blue end guide bymoving it down to the left thenpulling up, and attach it again atthe mark for the desired paper size.4 Insert the paper size notice card in thecard slot located on the inside front of thedrawer.7 Set the paper size detector lever to matchthe size of the paper you are loading.5 Attach the appropriate paper size labelto the paper size plate, and insert theplate in the slot at the drawer front.6 Lift up the blue lock lever and slide theside guide to match the size of the paperyou are loading. Lower the lever again tolock the side guide.8 Load the paper into the drawer. Make surethe paper size setting of the drawermatches the size of the paper.9 Even out the edges of the paper stack.Make sure the height of the paper stackdoes not exceed the limit mark .10 Push the paper drawer back into the machine. Repeat the steps above for the bottom draweras well.Load paper.1 Pull out the paper drawer until it stops.1 22 Remove the black wire 1 and shipping tag,and the orange tape 2.NOTE You can skip steps 3, 6 and 7 if you are loading letter size paper in the portrait orientation (LTR ). Note that some paper sizes have both portrait ( ) and landscape ( ) settings.

/ 8

Related manuals for Canon 2300N - ImageCLASS B/W Laser