Canon iR6570 Series Installation Procedure

Also see for iR5570 Series: Service manual General Timing Chart/General Circuit Diagram Service bulletin Service bulletin Service bulletin

Canon iR6570 Series Installation Procedure Manual pdf 24 page image

Chapter 116F-1-32When removing the spacer, move it to the right andpull it out lifting the front side.F-1-332) Pull out the half of the right deck and the cassette,open the lower right cover, and remove the pick-uproller pressure release spacers [1] for the right deck,the third, and the fourth cassette.Reference:The spacers are removed by pulling out the half of thedeck/cassette because the spacers are pressured anddifficult to be removed if the deck/cassette remain set.F-1-343) After removing the spacers, close the deck/cassetteand the lower right cover.4) Attach the door tape of the manual feed tray coverusing the screw, and close the tray cover.1.2.8 Installing the DeckPressure Plate 0008-8062iR5570 / iR65701) Press the release button of the left deck, and pull outthe left deck.2) Mount the deck pressure plate [1] in the packageusing the RS screw [2], which is also in thepackage.F-1-353) Close the left deck.[1][1][1][1] [2]