Job Build4-644Special Copying and Mail Box FeaturesJob BuildThis mode enables you to scan originals that are too many to be placed at once, by dividingthem into multiple batches. You can use both the feeder and the platen glass for scanning.The originals are printed as one document after all of the batches have been scanned.IMPORTANT• You cannot change the copy settings while the machine is scanning originals in the Job Build mode.You need to set the necessary copy/scan settings beforehand, according to the type of originals orthe desired result.• If you place your originals in the feeder, remove the originals from the original output area when thescanning of each batch is complete.• When copying, you can change or specify the following settings before scanning the next batch oforiginals (i.e., between batches): the number of copies, Two-sided Original mode, original type, andcopy exposure. However, if you specify the Image Combination mode with the Job Build mode, youcannot change the copy exposure and original type.• When storing a document in an inbox, you can change or specify the following settings before scanningthe next batch of originals (i.e., between batches): the 2-sided Original mode, original type, scanexposure. However, you cannot change the original type and scan exposure while the machine isscanning originals in the Image Combination mode.Originals Copies
