6 Use scissors or a cutting tool to cut the roll paper be-tween the stacker and the printer.7 Open the Top Cover of the printer and the canopy of the stacker, and check the position where paper isjammed.• If paper is jammed inside the Top Cover1. Pull the paper that remains in the stacker out fromthe printer side and close the canopy.2. Clear the roll paper jam by referring to step 3 and later in Clearing Jammed Roll Paper ➔P.111 .• If the paper is jammed in the stacker1. Pull paper that is jammed in the stacker out from theopposite side to the printer and close the canopy.2. Make it ready to print on roll paper by referring to step 7 and later in Clearing Jammed Roll Pa-per ➔P.111 .Troubleshooting When Paper Jams are not FoundTroubleshooting When Paper Jams are not FoundIf you cannot find a paper jam, search for the paper as follows.If the Stacker is installed on the printer, first remove the Stacker from the printer. (See "Installing and Removing theStacker On the Printer.") ➔P.301 Turn the printer off. (See "Turning the Printer On and Off.") ➔ User's GuideTroubleshooting When Paper Jams are not Found iPF850 SeriesBasic GuideTroubleshooting Problems Regarding Paper118