5 Holding the Roll Holder flange (a), guide the holderalong the Roll Loading Slots (b) on both ends, keepingthe holder level as you load it in the Roll Holder Slot.Caution• Do not force the Roll Holder into the printer with the right and left ends reversed. This may damage the printerand Roll Holder.• Do not release the flanges until the holder is loaded in the Roll Holder Slot.• Be careful not to pinch your fingers between the Roll Loading Slots (b) and the Roll Holder shaft (c) whenloading rolls.6 Insert the edge of the roll in the Paper Feed Slot (a) andadvance the roll until you hear the feed tone.Important• Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the printingquality. We recommend wearing clean cloth gloves when handling rolls to protect the printing surface.• If the paper is wrinkled or warped, straighten it out before loading it.• Load paper straight so it is not fed askew.7 Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and thebarcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.") ➔P.383ManageRe-mainRoll Barcodes Printer Operation After the Paper is FedOff Printed A menu for selection of the type of paper is automatically shown on the Display Screen.Press ▲ or ▼ to select the type of paper, and then press the OK button.Not printedOn Printed The type and amount of paper left is automatically detected based on the barcode printed on the roll.There is no need to specify the type and length of the paper.Not printed A menu for selection of the paper type and length is automatically shown on the Display Screen.iPF780 Loading Rolls in the PrinterUser's GuideHandling and Use of Paper Handling rolls375
