Cleaning the Paper Feed Roller 83Routine MaintenanceCleaning the Paper Feed RollerIf paper does not feed properly, clean the paper feed roller.1 Ensure the printer is turned on. If any paper is loaded in the printer,remove the paper.2 Hold down the RESUME/CANCEL button; when the POWER lamp flashesthree times, release the RESUME/CANCEL button.The paper roller will rotate as it cleans.Repeat this operation three times.3 Load a sheet of A4 or Letter plain paper in the printer.4 Hold down the RESUME/CANCEL button; when the POWER lamp flashesthree times, release the RESUME/CANCEL button.The paper that is loaded in the printer will feed through the printer and beejected.Repeat this operation three times.If the printer still will not feed paper through even after cleaning the paperfeed roller, perform the procedure described in step 4 again.
