51Using the Full Rangeof FeaturesESetting the Light-up ButtonsThe buttons above the LCD panel light upwhen the camcorder’s power is on, or whenyou press a button. This is helpful if, forexample, you wish to play back a tape in darkplaces.You can select the color of the light-upbuttons from green, orange, blue, yellow,turquoise and purple.Selecting the Light-up SettingOpen the menu and select [SYSTEM]. Select [BUTTONLIGHT], set it to[PUSH ON] or [OFF] and close the menu.• ON: The buttons light up while the camcorder is turned on. The color changes when youpress a button and turns back when you release the button.• PUSH ON: The buttons light up when you press a button and turn off when you releasethe button.• OFF: Buttons do not light up.Selecting the Color of the ButtonsOpen the menu and select [SYSTEM]. Select [LIGHT COLOR], set it to thedesired color and close the menu.You cannot change the color of the buttons when [BUTTONLIGHT] is set to [OFF].CARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERACARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERAZR70 MCBUTTONLIGHT•ONSYSTEMLIGHT COLOR•TURQUOISESYSTEMMENU buttonSelector dial( 44)( 44)
