104 Using a Memory CardZR65 MCZR70 MCERecording Still Images on a Memory CardYou can record still images with thecamcorder, from a tape in the camcorder( 105), or from devices connected via theDV terminal or AV terminal ( 106).❍ Do not turn off the camcorder, disconnect the power source or remove thememory card while the card access display (<<< or >>>) in the upper rightcorner of the screen or the card access indicator is flashing. Doing so couldresult in data damage.❍ When you are using a SD Memory Card, make sure that the protect switch isset to allow recording.Make sure to insert a memory card with enough remaining capacity.Recording with the Camcorder1. Set the camcorder to CARD CAMERA mode.The remaining image capacity and other information appear.2. Press the PHOTO button halfway.• F flashes in white and turns green when focus is adjusted.• Exposure is locked.• When you press the PHOTO button on the wireless controller,recording starts immediately.3. Press the PHOTO button fully.• You hear a shutter sound, and the screen appears as if ashutter has been released.• The card access indicator flashes.• The still image shown on the screen will be recorded on the memory card.To use the self-timer ( 70), press the (self-timer) button before step 2 andpress the PHOTO button fully.CARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERAPHOTOCard accessindicatorPHOTO buttonPHOTO
