78Playing Back the Added SoundYou can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjustthe balance of both sounds.1. Open the FUNC. menu, select ( ) the icon and press ( ).2. Select ( ) the [AUDIO SETUP] menu and press ( ). Then, select( ) the [12bit AUDIO] option and press ( ).3. Select a setting option and press ( ) to save the changes.• STEREO1: Plays back the original sound.• STEREO2: Plays back the added sound.• MIX/FIXED: Plays back Stereo 1 and Stereo 2 in the same level.• MIX/VAR.: Plays back Stereo 1 and Stereo 2. The mix balance can be adjusted.• If you select an audio setting other than [MIX/VAR.], close the menu.To adjust the mix level when you select [MIX/VAR.]:4. From the [AUDIO SETUP] menu select ( ) the [MIX BALANCE]option and press ( ).5. Adjust ( ) the mix level between ST-1 and ST-2 and press ( ) tosave the changes, then close the menu.The camcorder resets to [STEREO1] when you turn the camcorder off. However,the mix balance is memorized by the camcorder.MENU( 36) AUDIO SETUP 12bit AUDIO STEREO1
