Canon ZR40 Instruction Manual

Also see for ZR 40: Instruction manual Brochure & specs

Contents

Canon ZR40 Instruction Manual Manual pdf 84 page image

84EEditingTV:You cannot insert AV from a TV program with anomalous synchronized signals,such as when the program itself received poor signals.The tape in the camcorder:When using the ZR40’s AV insert function, only record to tapes recorded in SPmode.If there are non-recorded portions or portions recorded in LP mode on the tape,recording will stop.The playback tape:Use only tapes without non-recorded portions.If there are non-recorded portions or changes in the recording mode, you may notbe able to insert AV correctly.You cannot insert AV in the following cases:• The playback tape has been poorly recorded.• During special playback: fast forward playback, rewind playback or slowplayback etc. (analog only).1. Connect the camcorder to the VCR.2. Prepare the VCR and TV.• Set the TV/Video selector on the television to Video. For further details, see“Connections for Playback on a TV Screen” on p. 33.• Turn on the VCR and load a recorded cassette.• See your TV and VCR instruction manuals for details.3. Turn the camcorder’s POWER switch to PLAY (VCR) and load arecorded cassette.• Make sure the REC/SAVE tab on the cassette has been slid to REC (closedposition).Example recording from a VCRPreparationsDownloaded from www.Manualslib.com manuals search engine