83EEditingRecording Over Existing Scenes (AV Insert Editing)OUTPUTVIDEOS(S1)-VIDEOAUDIOLRSAVMICYou can insert new scenes from your VCR or other camcorder onto your pre-recorded tape using the ZR40’s analog line-in or DV in terminals. Original videoand audio will be replaced with the new video and audio.REW PLAY FFRECPAUSE SEARCHSELECTZERO SETMEMORYAUDIODUB. STOPAVINSERT PAUSE SLOW+ /– /×2The video and audio of the new scene replace that of the old.The playback tapeBefore insertingAfter insertingThe tape in thecamcorderThe tape in thecamcorderSide with arrowSide with arrowS-150 S-video Cable (optional)STV-250N Stereo Video CableInsert start point Insert end pointScene to be inserted: Signal flowMake sure the AV/headphone terminal is set to AV through the menu ( 33). IfPHONES appears in the display, switch the terminal.CV-150F DV Cable (optional)Downloaded from www.Manualslib.com manuals search engine
