Menu
Canon XA11 Instruction Manual
Also see for XA11: Quick start guideInstruction manual
                                                                                                                                                                |
Troubleshooting133Cannot copy scenes/photos- You may not be able to copy scenes/photos recorded or edited using another device and thentransferred to a memory card connected to the computer.Cannot mark individual scenes/photos in the index screen with a checkmark !- You cannot select more than 100 scenes/photos individually. Select the [All Scenes] or [AllPhotos] option instead of [Select].Indicators and Onscreen Displayslights up in red.- Battery pack is exhausted. Replace or charge the battery pack.appears on the screen.- The camcorder cannot communicate with the battery pack attached so the remaining batterytime cannot be displayed.The tally lamp does not light up.- Change the [FUNC.] > [MENU] > q > [Tally Lamp] setting to [On].The tally lamp flashes quickly (4 flashes per second).- The battery pack is exhausted. Replace or charge the battery pack.- The memory card is full. Delete some recordings (A 98, 109) to free some space or replacethe memory card.6/7 lights up in red.- The memory card is full. Delete some recordings (A 98, 109) to free some space or replacethe memory card./ lights up in red.- A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card.Initialize the memory card if the display does not change back to normal.Even after stopping recording, the ACCESS indicator does not go off.- The scene is being recorded on the memory card. This is not a malfunction.The red POWER/CHG indicator flashes rapidly (one flash at 0.5-second intervals).- The temperature of the battery pack is outside its operating range (approximately 0 – 40 °C(32 – 104 °F)). Remove the battery pack, warm it or let it cool down, as necessary, and trycharging it again.- Charge the battery pack in temperatures between approximately 0 °C and 40 °C (32 °F and104 °F).- The battery pack is damaged. Use a different battery pack.- Charging has stopped because the compact power adapter or the battery pack is faulty.Consult a Canon Service Center.Picture and SoundThe screen appears too dark.- Adjust the brightness with the [FUNC.] > [MENU] > q > [LCD Brightness] or [LCDBacklight] setting.Screen displays turn on and off repeatedly.- The battery pack is exhausted. Replace or charge the battery pack.- Remove the battery pack and reattach it correctly. |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved