Canon X Mark I Mouse Slim User Manual

● Keep the batteries out of reach of children.● Never expose batteries to high temperatures, direct heat, or dispose by incineration.● Do not mix new and old batteries or batteries of different types.● Do not allow metal objects to touch the battery terminals on the device; they canbecome hot and cause burns.● Remove batteries if worn out or stored for an extended period of time.● Always remove old, weak, or worn out batteries promptly and recycle or dispose ofthem in accordance with Federal, State, and Local regulations.● If a battery leaks, remove all batteries, taking care to keep the leaked fluid fromtouching your skin or clothes. If fluid from the battery comes into contact with skinor clothes, flush skin with water immediately.BATTERY CAUTION !Hardware : Bluetooth-enabled (v2.0) computer (with either built-in Bluetooth orexternal Bluetooth dongle)Windows based PC x86 / x64 or above, Intel-based MacOperating Windows® XP (SP2 or above) or Windows Vista® or Windows® 7System : Mac OS® X 10.4 ~ 10.6SYSTEM REQUIREMENTSBluetooth Mouse Calculator /Bluetooth Ratón CalculadoraUSER GUIDE /GUIA DE USARIOPRINTED IN CHINA / IMPRESO EN CHINAENGLISH● Use the mouse on a plain, smooth surface.● When using with another computer, please pair again using the initial setup.● The Bluetooth icon will remain on (solid, not flashing) when the Mouse Calculator issuccessfully connected to your computer.● To conserve battery, turn the Bluetooth connection off when travelling or whenusing as a calculator only without a computer.● Bluetooth connection requires battery power to function properly.USAGE TIPS● Never continue to use the Mouse Calculator if it starts to smoke, emits a strangeodor, or emits heat. Continued use of the calculator under such conditions createsthe danger of fire and electric shock.● When cleaning the Mouse Calculator, do not use a damp cloth or volatile liquidsuch as paint thinner; instead, use only a soft, dry cloth.● Never dispose of the Mouse Calculator improperly (such as burning), which canlead to personal injury or harm. You should dispose of this product in accordancewith Federal, State, and Local regulations.HANDLING AND CAREFrequency : 2.4 GHz frequency rangeConnection Range : The operating range is up to 10 meters (32.8 feet)NOTE : Connection range is affected by many factors, such as nearby metallic objectsand the relative positioning of the mouse and the receiver.BLUETOOTH SPECIFICATIONSModel : X Mark I Mouse SlimPower Source : AAA-size Alkaline batteries x 2Wireless Connection : Bluetooth v2.0Operating Temperature : 0ºC to 40ºC (30ºF to 104ºF)Dimension : 120mm (L) x 60mm (W) x 28mm (H) /4-23/32" (L) x 2-23/64" (W) x 1-7/64" (H)Weight : 83g (5.06oz) without battery / 106g (3.74oz) with batteryDEVICE SPECIFICATIONSIMPORTANT: READ BEFORE USEPlease read the following instructions and safetyprecautions before using the Mouse Calculator.Keep this sheet on hand for future reference.When Bluetooth connected, this Mouse Calculator has 2 modes --Calculator mode (CAL) and Keypad mode (KP).Switch between Calculator and Keypad ModeJ To switch between Calculator and Keypad mode,simply press the key.Calculator Mode (with Bluetooth connected)J The calculator performs normal 10-digit calculator operations.J Send calculation results or display contents to a computer by pressing SEND .• You cannot perform a send operation while the E (Error) indicator is shown onthe keypad calculator display.• The SEND key is disabled when the calculator is not Bluetooth connected.Keypad Mode (with Bluetooth connected)J Input the following to a computer directly:Numbers 0-9 + – × ÷Auto Power Off (APO) and Wake-upJ Calculator Only, NOT Bluetooth Connected• The device will APO after approximately 7 minutes of inactivity.Press the key to turn on the device.J CAL and KP Modes, WITH Bluetooth Connected• The Bluetooth connection disconnects after approximately 30 minutesof inactivity (display resets to “0”). The device will function the same as“Calculator Only, NOT Bluetooth Connected”.• Click the mouse button to re-activate the Bluetooth connection and mouse.• After the Bluetooth connection is disconnected, the device will APO after anadditional 7 minutes of inactivity. Click the mouse button or press to turnon the device and re-activate the Bluetooth connection.Power-low IndicatorJ When the display is dim or the icon appears,replace the batteries to avoid running out of powerunexpectedly.Keypad Lock (with Bluetooth connected)J Press the key and hold for 3 seconds to lock.J To unlock, press the key and hold for 3 seconds.CALCULATOR MODE AND KEYPAD MODEPower-low icon on displayKeypad locked displayKeypad modeCalculator modeMACINTOSH®1 To activate Bluetooth,go to the Bluetooth icon inthe menu bar and select“Turn Bluetooth On”.(NOTE: If already “On”, skip to 2.)Go to the Bluetooth icon and select“Set up Bluetooth Device...”to open the Bluetooth Setup Assistant.2Move the Bluetooth switch onthe device to “MAC ON”.(NOTE: The iconon the front displayshould be flashing.)3Your computer is now setup to use your Mouse Calculator.Click “Quit” in the Conclusion window to finish.6Press the “PAIR” button onthe device using the tip of apen or a similar object.(NOTE: In the Bluetooth Setup Assistant, the “Canon X Mark I Mouse”should appear under the Devices list. If not, wait a moment andpress the “PAIR” button again -or- move the Bluetooth switch to “OFF”and then to “Mac ON”, and press the “PAIR” button again.)4Select “Canon X Mark I Mouse” and click “Continue”.5To customize your Mouse Calculator, go to“System Preferences > Mouse”(NOTE: You can set the left or right button as the primary mouse button,customize zooming using the scroll wheel, and adjust the speed fortracking, scrolling and double-clicking.)743WINDOWS® VISTA AND WINDOWS® 7Your computer is now setup to use your Mouse Calculator.Click “Close” to finish.51 Windows® VistaGo to “Control Panel > Bluetooth Devices” andclick on “Add Wireless Device”.Windows® 7Go to “Control Panel > Hardware and Sound > Device and Printers”and click on “Add a Device”.Press the “PAIR” button onthe device using the tip of apen or a similar object.(NOTE: In the computer window,the “Canon X Mark I Mouse”should appear in the list of new devices. If not, wait a momentand press the “PAIR” button again -or- move the Bluetooth switch to“OFF” and then to “PC ON”, and press the “PAIR” button again.)32 To find the device, move theBluetooth switch on thedevice to “PC ON”.(NOTE: The iconon the front displayshould be flashing.)Select “Canon X Mark I Mouse” and click “Next”.(NOTE: Wait a moment while the computer connects to the device.It will take a few seconds for the computer to finish automaticallyinstalling the device. A notification should appear stating that thedevice has installed successfully.)432To customize your X Mark I Mouse, go to“Control Panel > Hardware and Sound > Mouse”.(NOTE: You can configure the primary mouse button, customize pointersand scrolling, adjust double-click speed, and more.)6KEY INDEX▪ Power onClear all display | Keypad lock / unlock▪ Clear last input entered | Clear all input (CAL mode only)Escape the input (KP mode only)▪ Switch between Calculator mode or Keypad mode▪ Backspace in Keypad mode; in Calculator mode shifts each digit of thedisplayed numerical value and clears the last significant digit.▪ Send calculation results or display contents to computer(CAL mode with Bluetooth Connection)▪ Perform percentage add-on and discount calculation. (CAL mode only)▪ Execute calculation (CAL mode only)Enter Key -- Confirm the input (KP mode only)▪ Set the number of digits displayed in calculation after the decimal pointPress and then press and hold , the display will change in thesequence of F 0 2 3 F (CAL mode only)▪ F represents a floating decimal pointPress the “PAIR” button onthe device using the tip of apen or a similar object.(NOTE: In the Bluetooth Device Selection window, the “Canon X MarkI Mouse” should appear. If not, wait a moment and press the “PAIR”button again -or- move the Bluetooth switch to “OFF” and then to“PC ON”, click “Search Again” and press the “PAIR” button again.)4Select “Canon X Mark I Mouse” and click “Next”.52 To make the device discoverable,move the Bluetooth switch on thedevice to “PC ON”.(NOTE: The iconon the front displayshould be flashing.)42To customize your Mouse Calculator, go to “Control Panel > Mouse”(NOTE: You can configure the primary mouse button, customize pointersand scrolling, adjust double-click speed, and more.)7Click “Next” on the computer.3THIS DEVICE IS WINDOWS AND MACINTOSH COMPATIBLE.You will be prompted during setup to select an operating system (OS) using theBluetooth OS switch on the back of the device. If the switch is set to an incorrectOS, the device may not function properly.If your computer does not have a built-in Bluetooth device, you need to purchasea Bluetooth USB adaptor (dongle).Before connecting the Mouse Calculator with your computer’s Bluetooth deviceor dongle, be sure the Bluetooth feature in your computer is enabled and ready.Open “My Bluetooth Places” and double-click on “Add a BluetoothDevice” to open the Bluetooth Setup.1Use the Mouse Calculator to click “Click here” to confirm that thecorrect mouse is being connected.Your computer is now setup to use your Mouse Calculator.6E-IM-2556© CANON ELECTRONIC BUSINESS MACHINES (H.K.) CO., LTD. 2011CANON ELECTRONIC BUSINESS MACHINES (H.K.) CO., LTD.17/F., Ever Gain Plaza, Tower One, 82-100 Container Port Road, Kwai Chung,New Territories, Hong KongCANON U.S.A., INC.One Canon Plaza, Lake Success, NY 11042, U.S.A.CANON CANADA INC.6390 Dixie Road, Mississauga, Ontario, L5T 1P7, CanadaCANON LATIN AMERICA, INC.703 Waterford Way, Suite 400, Miami, FL 33126, U.S.A.WINDOWS® XPScreens or set-up may vary depending on the computer or Bluetooth device driver.Instructions are provided for Windows® XP, Windows Vista®, Windows® 7, and Macintosh.INITIAL SETUP INSTRUCTIONS1. Remove the battery cover from the back of the Mouse Calculator by sliding thecover in the direction of the arrow.2. Install AAA alkaline batteries, matching the positive (+) and negative (–) ends ofeach battery with the polarity indicators inside the battery compartment.3. Place the battery cover back on the battery compartment.CAUTION: There is a risk of explosion if an incorrect battery type is installed.Please dispose of used batteries according to their instructions.BATTERY INSTALLATIONNOTE: All specifications are subject to change without notice.DEVICEThis device complies with International StandardIEC 60825-1 : 2007 for a Class 1 laser product.Complies with FDA performance standards for laserproducts except for deviations pursuant to LaserNotice No. 50, date June 24, 2007SPECIFICATIONSLaser power output : 23.9 microwattsEmitted laser wavelength : range 832 - 865 nanometersLASER PRODUCT CAUTION !▪ This is a Class 1 laser device that is safe under reasonably foreseeable conditionsas described by IEC 60825-1 : 2007.▪ Do not allow children to use the laser product unsupervised.▪ To avoid possible exposure to laser radiation, do not direct the laser beam at eyes.▪ Do not stare at laser beam or point into eyes — prolonged exposure can be hazardous.▪ Do not use on mirror-like (reflective) surfaces as it may reflect the laser into the eye.▪ Do not shine a laser pointer at anyone. Laser pointers are designed to illuminateinanimate objects.LASER SPECIFICATIONSIf the Mouse Calculator is not connected or not functioning properly:● Check battery placement direction.● Make sure computer meets the system requirements described.● Check if Bluetooth hardware and software are installed correctly and enabled.● Make sure the Bluetooth USB adapter (dongle) is functioning properly.● Remove obstacles between personal computer and the Mouse Calculator.● If recently connected with a different computer, reset the connection to your currentcomputer by repeating the initial setup.● If the display disappears after the Bluetooth is turned ON, press the key andcheck if the icon appears.● Change to new batteries if the icon appears.● If the “E” icon appears, the keypad is locked. Press to clear and resumeoperation. (The “E” icon occurs when the result or memory content exceeds 10digits to the left or when dividing by “0”.)J Electromagnetic interference or electrostatic discharge may causeany malfunction. If this occurs, use the tip of a pen (or similarobject) to press [CAL RESET] on the back of the device. And turnoff and on the Bluetooth switch.TROUBLESHOOTINGMOUSE COMPONENTS

/ 2

Related manuals for Canon X Mark I Mouse Slim