Setting Up the Printer1-14Installing the Output StackerThe output stacker is installed on the printer stand when the optional mediatake-up unit is not installed.1 To confirm the front and back end of the output stacker, spread theoutput stacker so the end with the larger area (a) is at the front andthe end with the smaller area (b) is at the back.The side of the output stacker cloth with the fold is the back side.2 Insert the arms of the back end (smaller portion) into the supportbrackets for the output stacker on the left and right side. Insert thearms completely into the grooves so the arms are level.ba
