2839 TroubleshootingMessages List1005410060100611006410065100911100111004An existing connection was forciblyclosed by the remote host.A connection attempt failed becausethe connected party did not properlyrespond after a period of time, orestablished connection failed becauseconnected host has failed to respond.No connection could be made becausethe target machine actively refused it.A socket operation failed because thedestination host was down.A socket operation was attempted to anunreachable host.WSAStartup cannot function at thistime because the underlying system ituses to provide network services iscurrently unavailable.No such host is known.The requested name is valid, but nodata of the requested type was found.The connection is disconnected by thecamera server due to camera serverrestart or other cause. This may occurwhen the camera server is restartedusing the restart button on theconfiguration page on the software-side.However, this rarely occurs.A timeout occurred in the TCPconnection with the camera server (Thisoccurs when the camera server is down).The camera server rejected the TCPconnection (This occurs when the portnumber specification is incorrect or othercause).This is recorded when the camera serveris down (Normally, 10060 occurs).There are no routes to connect to thecamera server (This may also occurwhen there is a failure in the networkcable connected to the PC or HUB).There is a failure on the PC networkboard.The host name in DNS could not beresolved.The host name in DNS could not beresolved (11004 may occur instead of11001 in 2003).Codes Error Messages Description
