Canon VIXIA HFM300 Instruction Manual

Also see for VIXIA HF M30: Software guide Instruction manual Reference guide Firmware update procedure Instruction manual

Contents

Canon VIXIA HFM300 Instruction Manual Manual pdf 35 page image

FirstTime SettingsSetting the Date and TimeYou will need to set the date and time ofthe camcorder before you can startusing it. The [Date/Time] screen willappear automatically when the cam-corder's clock is not set.When the [Date/Time] screen appears,the year will be selected.1 Touch a field you want to change (year, month, day, hours orminutes).2 Touch [A] or [V] to change the field as necessary.3 Set the correct date and time by changing all the fields in thesame way.4 Touch [Y.M.D], [M.D,Y] or [D.M.Y] to select the date format youprefer.5 Touch [24H] to use 24-hour clock or leave this control uncheckedto use 12-hour clock (AM/PM).6 Touch [OK] to start the clock and close the setup screen.(_) NOYES• When you do not use the camcorder for about 3 months, the built-inrechargeable lithium battery may discharge completely and the dateand time setting may be lost. In such case, recharge the built-in lithiumbattery ([_ 189) and set the time zone, date and time again.• To change the date and time later on (not during the initial setup), openthe [Date/Time] screen from the setup menus:[EuNGI]I _ [MENU] _ [Date!Time]* Only when performing the procedure in a recording mode,Preparations ,, 35