68 VideoNOTES• You can also add to the playlist ( 84) just the video snapshot scenesyou want to watch and arrange their playback order.• When the memory is initialized, music files will be erased as well.• Use the supplied software Music Transfer Utility to transfer music filesfrom the supplied Music Data CD-ROM to the camcorder. For details,refer to the ‘Music Transfer Utility Software Guide’ (PDF file).• Video snapshot is deactivated if the camcorder is switched to playbackmode or if the camera mode dial is set to .• The Music Data CD-ROM includes also extra music tracks thatwere not pre-installed in the built-in memory.• Transfer music files to the same memory that contains the videosnapshot scenes you want to play back.• When music files are transferred to the built-in memory ( only) orto a memory card after repeatedly recording and deleting recordings(fragmented memory), the movies and background music track may notbe played back correctly. In such case, we recommend saving yourrecordings on a computer ( 121), initializing the memory ( 43),transferring the music files and only then writing the video files back tothe camcorder.• If the USB cable is disconnected while transferring music files to thecamcorder, it may not be possible to correctly play back those musictracks. Delete the music tracks from the camcorder, and transfer themusic files again.Pre-recording FunctionThe camcorder will start recording 3 seconds before you press, ensuring you do not miss important shooting opportuni-ties. This is especially useful when it is difficult to predict when to startrecording.1 Open ( ) the joystick guide.2 Select ( ) [ Pre REC] and press .• appears.• Press again to turn pre-recording off.3 Press .( 34)START/STOPPre RECSTART/STOPCOPY
