Video 63recordings while on land, we recommend using the [s Surface]recording program.- To switch the recording program between [r Underwater] and[s Surface] while the camcorder is in the waterproof case, turn onthe camcorder while holding j pressed down.- p will appear on the screen when the camcorder's temperaturebecomes too high. If this happens, turn off the camcorder, take it outof the waterproof case and keep it in a cool place until thetemperature goes down. If the camcorder becomes too hot, it will turnoff automatically.- When making recordings underwater with the [r Underwater]recording program, the image on the LCD screen will appear redderthan the actual subject. This will not affect the recording.- When a commercially available wide-converter or other accessory isattached to the waterproof case, the camcorder may focus on theaccessory. In such case, move the zoom lever toward P to focus onthe subject.- See Specifications (0 202) for additional notes about the[r Underwater] and [s Surface] recording programs.* Underwater is a unique environment that is ever-changing, depending on factorssuch as the weather and water conditions. In addition, water absorbs red light,which causes objects to appear bluer and greener.Cinema Mode: Giving a Cinematic Look to your RecordingsGive your recordings a cinematic look by usingthe [D Cine Mode] recording program. Combinethis recording program with the 24 fps progressiveframe rate [E PF24] to get the enhanced effectof the 24p Cinema Mode.To set the [D Cine Mode] recording programOperating modes:[FUNC.] 8 [Rec. Programs] 8 [D Cine Mode] 8 [a]
