Canon VB150 User Manual

Also see for VB150: User guide User guide User manual

Contents

87Displaying Motion Detection Status of the ServerThe Motion Detection Setting Tool is a PC-based simulation of the motion detection module onthe VB150. Depending on the processing capacity of the PC and the network status between thePC and VB150, there may be a divergence between the PC and the actual processing on theVB150. As a result, the motion detection module on the VB150 is enabled and the detectionstatuses are displayed using icons.cNote● The motion detection status of the server display may not match the“Motion detected (peak display)” in this tool.● If the NU-700 is used, setting ND Filter (→ P.97) to ON may cause detectionerrors.● When "Display motion detection status of the server" option is selected,external device and log output, and picture recording are not performed.eTip● When the VB150 Motion Detection Function is enabled, the processing loadon the VB150 is high. Consequently, the video distribution frame rate maybe slower than when the function is disabled. Also, because the videodistribution frame rate may be further slowed when the data is sent via aproxy, the use of proxies is not recommended.● Because the Motion Detection Function detects motion by comparingconsecutive image frames, small movements are less likely to be detectedwhen the video quality is poor.● The motion detection settings should be adjusted and set in conditions thatare as close as possible to those for actual operation.● For detailed information on specifying the settings, see P.5 in the dPictureRecording User’s Guide.If you select the “Display motion detection status ofthe server” checkbox, the icons shown below areused to show the status of motion detection.[Detection disabled][Detected][Not detected]