Canon VB101 User Manual

Also see for VB101: Pin assigments guide User manual

Contents

Setup Procedures332 3312756LANcableHubEnter the user name and password.User name: rootPassword: VB101Launch the browser and enter thefollowing URL:http://192.168.100.1/admin/The title page for specify is displayed.A sample page is shown at:http://192.168.100.1/sample/Settings page21 3Checking OperationWhen you have completed the initial setup, check that the VB101 works normally. Use thesample page to simplify checking.cNoteInstall the Web browser on your PC beforehand.cNoteFor the example, the IP address is given as "192.168.100.1". However, the actualIP address must be changed to match your system settings.Follow steps - below to launch the browser and enteryour user name and password.Check the operation (→ P.33) and specify detailed settings(→ P.34).Remove the RS-232C path cable connected to the PC usedfor initial setup and connect the LAN cable.When you connect cable, turns off the VB101 power.cNoteFor the example, the IP address is given as "192.168.100.1". However, the actualIP address must be changed to match your system settings.cNotel When you change the settings, always you should click the "Send Config.to VB101", or the "Send Config. and Reboot VB101" button.l Before check the operation, install the Web browser on your PC.l To restore the factory initial settings, refer to P.106 in the appendix.When you have completed initial setup, launch the Webbrowser and enter the following URL:(Example) http://192.168.100.1/sample/Enter the value specified in the initial settings (→ P.31) as the IP address(192.168.100.1).Click on the sample page.If the sample page appears and the video image is displayed, the VB101 is operatingnormally.Initial SetupSample page