Canon VB101 User Manual

Also see for VB101: Pin assigments guide User manual

Contents

106Parameter Name DescriptionOmissibleYesUse this parameter to set the background color. The parameter specification format is"#RRGGBB" (values between 0 and 255 for each component color expressed as a hexadecimal).Eg. White: "#FFFFFF", Grey: "#AAAAAA", Green: "#00FF00"If this parameter is omitted, the default background color is used.bg_colorYesclose_imageYes This parameter specifies the comment text string displayed as an overlay on the applet.If this parameter is omitted, no comment is displayed.commentYesSpecifies whether the panorama window should be pop-up displayed or embedded inthe page. Specify “embed” for making it an embedded display. When specifying“embed”, the Width and Height of the applet tags must be specified a little larger (Eg.width=500; height=660).gui-typeYes This parameter specifies the host name displayed in the applet. This value is used as the host namein messages displayed during connection, etc. If this parameter is omitted, no host name is displayed.hostnameYesopen_imageYou can use this parameter to specify the screen displayed in the video displaywindow at the time of disconnection. Specify the name of a JPEG or GIF file. If thisparameter is omitted, the default disconnection screen is displayed.You can use this parameter to specify the screen that appears in the video displaywindow until the first video image appears. Specify the name of a JPEG or GIF file. Ifthis parameter is omitted, the default startup screen is displayed.Yes This function displays the frame rate as an overlay on the video image. Specify "on" or "off". The default value is "off".show_fpsYes This function displays the host name as an overlay on the video image. Specify "on" or "off". Thedefault value is "off". Note that this parameter is only valid if the "hostname" parameter is specified.show_hostnameYesThis function displays a bitmap image as an overlay on the video image. Specify the image using the "bitmap-filename,x,y"format. Use the GIF format for bitmap images (transparent GIFs supported). The "x,y" parameters specify the coordinatesof the bitmap image position on the video frame. If "x,y" is omitted, the image is displayed in the center of the video frame.superimposeYesThis parameter specifies the video image display size (in pixels). Specify the width. Thedisplay sizes are 80 to 640, and any value can be set as the width. The height iscalculated as 3/4 of the specified width. Eg. video_width="240" (height = 240 x 3/4 = 180.)video_widthYesWhen a startup screen is specified in the "open_image" parameter, this parameter specifies thedisplay time. The time is specified in milliseconds (1/1000 sec.), and the default value is 0. The imageis displayed until the first video frame appears. Values from 0 to 30000 (30 seconds) can be specified.open_image_timeYes This function displays the comment as an overlay on the video image. Specify "on" or "off". The default value is "off".show_commentYes Specify whether or not to display the panorama window pop-up button.show_panobuttonYes This function displays the frame count as an overlay on the video image. Specify "on" or "off". The default value is "off".show_counterYes This function specifies whether the Snapshot button is displayed. Specify "on" or "off". Thedefault value is "on". The button is always displayed unless "off" is explicitly specified.show_captureNo Specify the URL of the HTTP server for applet access. Specify the IP address andport number that match those specified in the codebase attribute.urlJava Viewer ParametersYou can specify applet parameters to provide an applet tailored to modify the behaviour or appearance ofapplets. Refer to the table below to ensure that you thoroughly understand the parameters.LiveAppletUsing a Java Viewer to Distribute Videos