Canon Shift Tray-D1 Service Manual

Contents

Canon Shift Tray-D1 Service Manual Manual pdf 32 page image

Chapter 33-4F-3-123.2.1.2 Removing the TrayDrive Unit 0009-35261) Free the 2 retaining claws [1], and detach the cableretaining plate [2].F-3-132) Remove the 2 screws [3], and detach the 2 tray fullsensors [4] and the 2 grounding wires.3) Free the cable of the tray full sensor from the clamp[5], and disconnect the connector [6].F-3-144) From the back of the shift tray, remove the 4 screws[7] and detach the 4 shaft retainers [8]; then, detachthe tray drive assembly [9].F-3-155) Pull off the shaft [10] from the tray drive assembly;then, remove the 3 screws [11], and detach the shieldcover [12].F-3-166) Remove the 2 screws[13] and the connector [14];then, remove the tray drive unit [15].F-3-17[1][1][2][3][4][4][5][6][7][8][8][9][11][12] [10][13][14][15]