Canon SELPHY ES2 User Manual

Also see for 2096B001 - SELPHY ES2 Photo Printer: Software guide Software guide Beginner's guide

Contents

Canon SELPHY ES2 User Manual Manual pdf 56 page image

56 Printing from a Mobile Phone (Wireless Printing)Infrared (IrDA) Wireless Printing (SELPHY ES2 only)Print images transmitted from a mobile phone supporting infrared data communication (IrDA).z The mobile phone must have the following features.• Infrared data communication (infrared data communication port supporting IrDA)• Built-in camera capable of recording and saving JPEG images.1 Check that no memory cards are inserted in the printer, noBluetooth unit is attached, and the camera is not connected viaUSB cable.2 Press to turn the printer's power on until the power lamp lightsgreen.3 Transmit an image from your mobile phone to the printer.• Printing starts after datatransmission is completed.3 • Printing is done according to the setting value specified in [Print Settings]. Setting of each itemmust be done in advance (p. 46).• During transmission, the power lamp blinks green. If transmission is interrupted, the powerlamp stops blinking and lights green. Check the message appearing on the mobile phonedisplay if an error occurs.• Printing cannot be canceled by pressing during infrared printing.• If the transfer is not working well, reposition the mobile phone closer and directly in front of theinfrared data receiver and reinitiate the transfer.• Note that the distance over which infrared signals can be transmitted and received variesaccording to the mobile phone model. For details on connection, refer to your mobile phone'smanual.Within 20 cm (7.9 in.) (Do notplace objects within thisrange.)Effective rangeApprox. 10 degrees (both topor bottom and left or right)