Canon SELPHY CP400 User Manual

Also see for SELPHY CP400: Software guide Software guide Supplementary guide User guide User guide

Contents

Canon SELPHY CP400 User Manual Manual pdf 30 page image

29Connecting a Power Source and the Camera tothe PrinterConnect the camera to the printer using the cable (included with the camera)and turn the printer’s power on.For more detailed camera connection instructions, refer to your Camera UserGuide or Direct Print User Guide.* Canon cameras compatible with CP400, and non-Canon cameras compatible withPictBridge can also be connected.The numbered steps in the following instructions refer to the numbers in the aboveillustration.1 Place the printer on a flat area.• Be sure to leave about 15 cm (6 in.) of clearance around the paper-handling slot(at the rear) so that paper has sufficient room to jut out from the slot duringprinting.2 Connect the supplied power cord to the supplied CompactPower Adapter CA-CP200.3 Insert the plug in a power outlet.12 3456To DIGITAL terminalCamera*To DC IN terminalCamera’s Compact PowerAdapter (sold separately orincluded with the camera)• Please use the camera’scompact power adapter or afully charged battery pack (orcharged batteries).To poweroutletInterface cableincluded withthe cameraTo power outletCompact poweradapter15 cm (6 in.) at thefront and back of thedevices and 10 cm(4 in.) on both sides ormore of open space