Canon SD10 - Powershot 4MP Digital Camera Quick Start Manual

Also see for Digital IXUS i Powershot SD10: Manual

Contents

Canon SD10 - Powershot 4MP Digital Camera Quick Start Manual Manual pdf 1 page image

Computers and SoftwareSoftware Starter GuideBasic software operationsZoomBrowser EX Software User Guide(Windows ® )ImageBrowser Software User Guide(Macintosh)The PDF format manuals contain detailed softwareoperations, and are available on the Canon website.Please download them from the following URL:http://web.canon.jp/Imaging/information-e.htmlCDI-E103-010 XXXXXX © CANON INC. PRINTED IN JAPANThis guide explains the required operations thefirst time the camera is used, and how toconnect to a computer. For usage precautionsand detailed instructions, please refer to themanuals listed below.ENGLISHDo not connect the camera to the computerbefore the software is installed.CameraCamera User GuideHandling precautions and detailed operations forthe cameraPrintersDirect Printer User GuideDetailed printer operations1 Preparing the Camera1.Charge the battery.Install the battery.Charge IndicatorCharging: RedCharging complete: Green(Charging time: Approx. 95 min.)Remove the battery.2.Install the battery.Open the cover.Install the battery.3.Install the SD card.Insert theSD card.Close the cover.2 Shooting1.Slide the mode switch to(Shooting) and press the On/Offbutton until the camera powers on.The first time you use the camera, set the date andtime. See “Set the Date and Time” below.Basic Shooting OperationsFor an overview of basic shooting operations, see“Overview” on the reverse side.2.Focus.Press the shutter buttonhalfway. The camera beepstwice when the subject is infocus.3.Shoot.Press the shutter button fully.You will hear the sound of theshutter close when the shotis complete.Set the Date and TimeUse the or button to select items, and use the orbutton to change the value. To put the settings intoeffect, press the button.3 Reviewing an Image1.Slide the mode switch to(Playback).2.Use the or button to display animage.4 Erasing an Image1.Use the or button to display animage.2.Press the button.3.Check that [Erase] is selected andpress the button.To exit instead of erasing, select [Cancel] using theor button and press the button.Please note that erased images cannot be recovered.Exercise caution before erasing a file.Continued on the reverse side.

/ 2

Related manuals for Canon Digital IXUS i Powershot SD10