340TroubleshootingPaper Jams or Does Not Feed Paper does not feed from auto sheet feederAfter the print job is started, the paper loaded in the auto sheet feeder does not feed.Check 1 IS THE PAPER TOO THICK ?Thick paper does not feed from the auto sheet feeder. Do not attempt toprint on paper or other media thicker than .024" or 28 lb (0.6 mm or105 g/m2 ).Check 2 IS THE SHEET FEEDER OVERLOADED ?The number of sheets you can load in the auto sheet feeder depends onthe media you are using. The media does not feed correctly if you exceedthe prescribed number of sheets.Check 3 DID YOU RAISE THE PAPER REST ?Before you load media other than envelopes in the auto sheet feeder, youshould always raise the paper rest. If you do not raise the paper rest beforeloading, the media does not completely enter the paper feed slot duringfeeding.Check 4 IS THE PAPER FOLDED OR CURLED ?To avoid misfeeds and paper jams, never load paper in the auto sheetfeeder that is folded, curled, or wrinkled.Media Sizes You Can Use With the PrinterMedia Types You Cannot Use With the Printer
