194Using the Windows 98/95 Printer DriverUsing Maintenance FunctionsSelect the desired settings in the Auto Power dialog box.Auto Power On:Click the down-arrow and select either Enable or Disable. When this settingis enabled, the printer is turned on when data is sent to the printer. Thedefault setting is Disable.Auto Power Off:Click the down-arrow and select the desired value. When no data is sent tothe printer within the set time interval, the printer is turned off automatically.The default setting is Disable.Make sure that the printer is turned on and click the Send button.When a confirmation message appears, click the OK button.When you wish to disable the Auto Power On/Off setting, select Disable forAuto Power On and Auto Power Off in the Auto Power dialog box.345Note
