|
Using the Self=timer_ Press the <_Dj_ _®> button._ elect the self=timer._ Press the <_> key or turn the<_ > dial to select the self-timer,then press <_)>._®: lO-sec, self-timerTheremotecontrollercanalsobeused(p.307)._.32: 2-sec. self4imer (p.142)_c: lO-sec, self-timer pluscontinuous shotsPress the key to set thenumber of multiple shots (2 to 10)to be taken with the self-timer._._ Take the picture._ Lookthroughthe viewfinder,focusthe subject,thenpress the shutterbuttoncompletely.b Youcan check the self-timer operation withthe self-timer lamp, beeper, and countdowndisplay (in seconds) on the LCD monitor._,, Two seconds before the picture istaken, the self-timer lamp wiii light upand the beeper wiii sound faster._1 _!_With <_¢>, the interval between the mc tiple shots may be prolonged dependingon the shooting functions settings such as the image-recording quahty or flash.If you do not look through the viewfinder when you press the shutterbutton, attach the eyepiece cover (p.308). If stray light enters theviewfinder when the picture is taken, it may throw off the exposure.] _ ]-he <_.)2> enables you to shootwhile not touching the camera mounted on atripod. This prevents camera shake while you shoot still lifes or long exposures.After taking self-timer shots, playing back the image (p.84) to checkfocus and exposure is recommended.÷, When using the self-timer to shoot only yourself, use focus lock (p.61) onan obtect at about the same distance as where you will stand.To cancel the self-timer after it starts, press the <4 D_ _®> button106
PreviousNext |