208With a commercially-available Eye-Fi card already set up, you canautomatically transfer captured images to a personal computer orupload them to an online service via a wireless LAN.The image transfer is a function of the Eye-Fi card. To set up, use thecard and to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or inquire the card’s manufacturer.This product is not guaranteed to support Eye-Fi cardfunctions (including wireless transfer). In case of an issuewith an Eye-Fi card, please check with the card manufacturer.Also note that an approval is required to use Eye-Fi cards inmany countries or regions. Without approval, use of the cardis not permitted. If it is unclear whether the card has beenapproved for use in the area, please check with the cardmanufacturer.1 Insert an Eye-Fi card. (p.31)2 Select [Eye-Fi settings].Under the [5] tab, select [Eye-Fisettings], then press <0>.This menu is displayed only when anEye-Fi card has been loaded in thecamera.3 Enable the Eye-Fi transmission.Press <0>, set [Eye-Fi trans.] to[Enable], then press <0>.If you set [Disable], automatictransmission will not occur even withthe Eye-Fi card loaded (Transmissionstatus icon I).4 Display the connectioninformation.Select [Connection info.], then press<0>.Using Eye-Fi CardsCOPY
