Menu
Canon Racer 538 Wren Assembly Instructions Manual
  |
Mountain fold (dotted line)Make a mountain fold.Valley fold (dashed and dotted line)Make a valley fold.Cut line (solid line)Cut along the line.Cut in line (solid line)Cut along the line.ToolsScissors, glue, ruler, tweezers, pencil! [Caution] Glue, scissors and other tools may be dan-gerous to young children so be sure to keep them out ofthe reach of young children.Assembly InstructionsTry to avoid bending the parts when you cut them out.When assembling the parts, follow the assembly in-structions and use the parts in the order given.When sticking surfaces together, spread the glue evenlyand stick the parts together quickly and line up theedges cleanly. While the glue is drying, put the fuse-lage inside a sheet of paper and then press it down witha book or similar in order to get a nice, straight finish.When sticking the right and left wings together, makesure that the center line is not off center.Center lineTo glue the wings flush onto the fuselage, use a pencilor scissors to flatten out the part where the wings at-tach to the fuselage.Rub with pencil or scissorsto flatten out.Flatten the uneven surface.Cross section of the fuselageTo give the wings an angle, bend along a straightruler. (Refer to the assembly instructions for details onwhat degree of angle to use.)Dihedral angleAttach the wings and horizontal stabilizer carefully sothat their center lines match up exactly with the centerline of the fuselage.Make sure that the center line ofthe wings matches up exactlywith the center line of the fuselage.Also attach the horizontal stabilizer firmly.Arrow points forward.Arrow points forward.If any of the cut out parts are bent, this will seriouslyaffect the glider's performance. Therefore, be sure tokeep all parts perfectly flat till you join them up. Forthe wings, stabilizer and other parts, use a ruler togive you a proper straight edge to make your folds.Align the partsagainst a ruler to fold them.Points to note when making the gliderhttp://www.canon.com/c-park /en/- 1 -Racer 538 Wren: Assembly Instructions |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved