Changing Shooting Functions138Displaying the OverlayYou can display gridlines for vertical and horizontal guidance, or a 3:2 guideto confirm the printable area for postcard size prints.● Choose [Disp. Overlay], then press the qrbuttons to choose an option.Changing the IS-Mode Settings● Choose [IS Mode], then press the qr buttonsto choose an option.Grid Lines A grid overlays the display.3:2 GuideThe areas outside the 3:2 range aregrayed out. This area will not printwhen printing on paper with a 3:2aspect ratio.Both Both grid lines, and the 3:2 guide willdisplay.• In mode, you cannot set [3:2 Guide] or [Both].• Grid Lines will not be recorded on the image.• The gray areas displayed with [3:2 Guide] are the areas that will not beprinted. The actual image recorded will include the portion in the gray areas.ContinuousImage stabilization is always on. You canconfirm the result directly on the display,which makes it easier to check thecomposition or focus.Shoot Only Image stabilization is only active at themoment of shooting.PanningImage stabilization only counters up anddown motion. This option isrecommended for shooting objectsmoving horizontally.• If camera shake is too strong, attach the camera to a tripod. It isrecommended to set the IS Mode to [Off] when the camera is attachedto a tripod.• When using [Panning], hold the camera horizontally. Image stabilizationdoes not work when the camera is held vertically.COPY
