Canon PowerShot SX280 HS User Manual

Contents

1234567891011CoverPreliminary Notesand Legal InformationContents: BasicOperationsAdvanced GuideCamera BasicsUsing GPSFunctionAuto Mode/Hybrid Auto ModeOther ShootingModesTv, Av, and MModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuideP Mode150Date and TimeAdjust the date and time as follows.zz Choose [Date/Time], and then press the<m> button.zz Press the <q><r> buttons to choose anitem, and then adjust the setting, eitherby pressing the <o><p> buttons orturning the <5> dial.World ClockTo ensure that your shots will have the correct local date and time when youtravel abroad, simply register the destination in advance and switch to thattime zone. This convenient feature eliminates the need to change the Date/Time setting manually.Before using the world clock, be sure to set the date and time and yourhome time zone, as described in “Setting the Date and Time” (=16).1 Specify your destination.zz Choose [Time Zone], and then press the<m> button.zz Press the <o><p> buttons or turn the<5> dial to choose [ World], and thenpress the <m> button.zz Press the <q><r> buttons or turn the<5> dial to choose the destination.zz To set daylight saving time (1 hourahead), press the <o><p> buttons tochoose [ ].zz Press the <m> button.2 Switch to the destination timezone.zz Press the <o><p> buttons or turn the<5> dial to choose [ World], and thenpress the <n> button.XX [ ] is now shown on the shooting screen(=179).• Adjusting the date or time while in [ ] mode (=16) will automaticallyupdate your [ Home] time and date.SX280 HSActivating GPS Features or LoggingGPS features and logging can be activated as follows. For instructions afteractivating these features, see “Using GPS Function” (=40).zz Choose [GPS Settings], and then pressthe <m> button.zz To activate GPS features, choose [GPS],and then choose [On].zz To activate logging, first activate GPS asdescribed above, choose [GPS Logger],and then choose [On].zz When you press the <n> button,a message about GPS and logging isdisplayed. Press the <m> button afterreading the message.COPY