Canon PowerShot SX10 IS User Manual

Also see for 2665B001: Technical specifications

Contents

Canon PowerShot SX10 IS User Manual Manual pdf 74 page image

72Using the FlashAvailable Shooting Modes p. 2841 Raise the flash manually.2 Press the button.1. Use the or button to change theflash mode.: [Auto]: [On]• You can configure detailed settings for the flash when you pressthe MENU button while this screen is displayed (p. 110).3 When you are not using theflash, lower the flash until itcloses.• (flash off) appears in the LCDmonitor.You are recommended to shoot with the camera attached to atripod or other device if the camera shake warning iconappears.z The time required for flash recharging will change dependingon usage conditions and remaining battery power.z A flashing red in the LCD monitor (or the viewfinder)indicates insufficient light level. In this case, raise the flashbefore shooting. However, when shooting with the ,or mode there is no indication.COPY