128Before UseBasic GuideAdvanced GuideCamera BasicsAuto ModeOther ShootingModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexHybrid Auto /Dual Capture ModeAccessing the Wi-Fi MenuInitial Connection via Wi-FiTo start with, register a camera nickname.This nickname will be displayed on the screen of target devices whenconnecting to other devices via Wi-Fi.1 Access the Wi-Fi menu.zz Press the <1> button to turn the cameraon.zz Press the <o> button.2 Enter a nickname.zz Press the <m> button to access thekeyboard, and then enter a nickname(=27).zz Up to 16 characters can be used.zz Press the <o><p> buttons to choose[OK], and then press the <m> button.zz The Wi-Fi menu is displayed.• When connecting wirelessly to any device other than a computer, a memorycard must be inserted in the camera. Additionally, the memory card mustcontain images before you can access Web services or connect to a printerwirelessly.• To change the camera’s nickname, choose MENU (=26) > [3] tab > [Wi-FiSettings] > [Change Device Nickname].• A message will be displayed if the nickname you attempt to enter in step 2begins with a symbol or space. Press the <m> button and enter a differentnickname.After the Initial Wi-Fi Connection• Once you have connected to devices via Wi-Fi, recent destinations willbe listed first when you access the Wi-Fi menu by pressing the < >button. You can easily connect again by pressing the <o><p> buttonsto choose the device name and then pressing the <m> button.• To add a new device, display the device selection screen by pressing the<q><r> buttons, and then configure the setting.• If you prefer not to display recent target devices, choose MENU (=26) >[3] tab > [Wi-Fi Settings] > [Target History] > [Off].COPY
