Canon Pixma iP6700D Direct Printing Manual

Also see for iP6700D - PIXMA Color Inkjet Printer: Supplementary guide Brochure Quick start guide Quick start guide Specifications

Canon Pixma iP6700D Direct Printing Manual Manual pdf 33 page image

32TroubleshootingLet’s take a look at countermeasures against troubles which may occur during use of the printer. “An Error Message is Displayed on the LCD” on page 32 “POWER Lamp and Alarm Lamp Flash Alternately” on page 35 “Cannot See the Display Properly on the LCD/Cannot See the Display on the LCD” on page 35 “An Unintended Language is Displayed on the LCD” on page 35 “Printer Does Not Start/ Ink Does Not Come Out/ Printing is Blurred/Colors are Wrong/WhiteStreaks” on page 35 “Back of Paper is Smudged/Paper Does Not Feed Properly/Printed Surface is Scratched” onpage 37 “Paper Jams” on page 40 “Cannot Print Properly from the Digital Camera” on page 43 An Error Message is Displayed on the LCDIf Alarm lamp lights, and an error message is displayed on the LCD, take the corresponding countermeasuredescribed below.Here, we will discuss errors indicated on the LCD, problems that might occur during direct printingfrom the digital camera. If you cannot find the symptom corresponding to a certain problem, refer tothe User’s Guide.Message Try ThisThere are no photos inmemory card.• Photo data edited/processed on the computer should be printedfrom the computer, not from the camera.• There is no proper data in the memory card. See “Memory CardsSupported by This Printer” on page 5.Ink has run out. Replacethe ink tank and close thecover.U041The ink has run out (The lamp on the ink tank flashes).Replace the ink tank, and close the cover.If printing is in progress and you want to continue printing, press theOK button with the ink tank installed. Then printing can continue underthe ink out condition. Replace the empty ink tank immediately after theprinting. The printer may be damaged if printing is continued under theink out condition.If multiple ink tank lamps are flashing red, check how fast they flash.Fast flashing (at about one second interval) indicates the ink is empty.Slow flashing (at about three second interval) indicates ink is low. Fordetails on different flashing speeds, see “Getting the Ink LevelInformation” on page 23.Print head is not installed.Install the print head./Thetype of print head isincorrect. Install the correctprint head.Install the print head. If the print head is already installed, remove theprint head and reinstall it.If this error still remains, the print head may be damaged. Contact aCanon service representative.