Canon Pixma Pro-1 Getting Started

Also see for PIXMA PRO-1 Series: User guide Getting started Network Setup Setup guide Getting started

Contents

Canon Pixma Pro-1 Getting Started Manual pdf 61 page image

60SpecificationsGeneral SpecificationsPrinting resolution )dpi(4800* )horizontal( X 2400 )vertical(* Ink droplets can be placed with a pitch of 1/4800 inch at minimum.InterfaceUSB Port:Hi-Speed USB *1Direct Print Port:PictBridgeLAN Port:Wired LAN: 100BASE-TX/10BASE-T*1 A computer that complies with Hi-Speed USB standard is required.Since the Hi-Speed USB interface is fully upwardly compatible withUSB 1.1, it can be used at USB 1.1.Print width]Manual Feed Tray] 348.8 mm/13.7 inches)for Borderless Printing: 356 mm/14 inches(]Rear Tray] 322.2 mm/12.7 inches)for Borderless Printing: 329 mm/13 inches(Operating environmentTemperature: 5 to 35°C )41 to 95°F(Humidity: 10 to 90 % RH )no condensation(Storage environmentTemperature: 0 to 40°C )32 to 104°F(Humidity: 5 to 95 % RH )no condensation(Power supplyAC 100-240 V, 50/60 HzPower consumptionPrinting: Approx. 24 WStandby )minimum(: Approx. 1.6 W *1*2OFF: Approx. 0.4 W *1*1 USB connection to PC*2 The wait time for standby cannot be changed.External dimensionsApprox. 695 )W( X 462 )D( X 239 )H( mmApprox. 27.4 )W( X 18.2 )D( X 9.5 )H( inches* With the Paper Support and Paper Output Tray retracted.WeightApprox. 27.7 kg )Approx. 60.9 lb(* With the Print Head and ink tanks installed.Print Head/InkTotal 12288 nozzles )Y/M/C/R/PM/PC/MBK/PBK/DGY/GY/LGY/CO each1024 X 12 nozzles(Minimum System RequirementsConform to the operating system’s requirements when higher than those given here.Operating System/Processor/RAMWindows 71 GHz or faster 32-bit )x86( or 64-bit )x64(processor1 GB )32-bit(/2 GB )64-bit(Windows Vista, Vista SP1, Vista SP21 GHz processor512 MBWindows XP SP2, SP3300 MHz processor128 MBMac OS X v.10.6Intel processor1 GBMac OS X v.10.5Intel processor, PowerPC G5, PowerPC G4)867 MHz or faster(512 MBMac OS X v.10.4.11Intel processor, PowerPC G5, PowerPC G4,PowerPC G3256 MBBrowserInternet Explorer 6 or later Safari 3 or laterHard Disk Space1.5 GBNote: For bundled software installation.The necessary amount of hard disk spacemay be changed without notice.1.5 GBNote: For bundled software installation.The necessary amount of hard disk spacemay be changed without notice.CD-ROM DriveRequired RequiredDisplaySVGA 800 x 600 XGA 1024 x 768Easy-PhotoPrint Pro is a software plug-in for Canon Digital Photo Professional Ver. 2.1 orlater, Adobe Photoshop CS5, CS4, CS3, CS2, and CS, Adobe Photoshop Elements 6, 7*,8 and 9, and Adobe Photoshop Lightroom 2 and 3.* Windows only.Windows: Operation can only be guaranteed on a PC with Windows 7, Windows Vista orWindows XP pre-installed.Windows: Uninstall software bundled with the Canon inkjet printer before upgrading fromWindows Vista to Windows 7, then, install the bundled software again.Macintosh: Hard Disk must be formatted as Mac OS Extended )Journaled( or Mac OSExtended.Macintosh: After upgrading from Mac OS X v.10.5 or lower to Mac OS X v.10.6, installsoftware bundled with the Canon inkjet printer.Internet Explorer 7 or later )Windows(, or Safari 4 or later )for Mac OS X v.10.5 or later( isrequired to install Easy-WebPrint EX.Network SpecificationsCommunication protocolTCP/IPWired LANSupported Standards: IEEE802.3u )100BASE-TX(/IEEE802.3 )10BASE-T(Transfer speed: 10 M/100 Mbps )auto switching(Specifications are subject to change without notice.About ConsumablesConsumables )ink tanks / FINE Cartridges( are available for 5 years after production has stopped.Downloaded from ManualsPrinter.com Manuals

/ 64

Related manuals for Canon PIXMA PRO-1 Series