Safety PrecautionsWhen using the flash, be careful not to cover it with your fingers or clothing.This could result in burns or damage to the flash.Do not aim the camera at bright light sources (the sun, etc.).Doing so may cause malfunctions or damage the image sensor.allow dust or sand to enter the camera.This may cause the camera to malfunction.This is due to the high intensity of the flash burning dust and foreign materials stuck to thefront of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter fromthe flash to prevent heat build-up and damage to the unit.t_ p_ror when you are not using it.Do not place anything, such as cloth on top of the battery charger while it ischarging.Leaving the unit plugged in for a long period of time may cause it to overheat and distort,resulting in fire.If the battery is left inside the camera, damage caused by leakage may occur.: Be:f0reyou discardbat(_eries_covertheterminaiswithtapeorotherinsulators ......Contacting other metal materials in waste containers may lead to fire or explosions.Pets biting the battery could cause leakage, overheating or explosion, resulting in fire orinjuries.Doing so may cause malfunctions or damage the screen.When putting the camera I_je o me intocontact with the screen.Do not attach accessories to the strap.Doing so may cause malfunctions or damage the screen.11