2. CLEANING MODE AND AMOUNT OF INK PURGED2-1. CleaningTo prevent printing problems due to bubbles, dust, or ink clogging, print head cleaning is performed before thestart of printing (when the cleaning flag is on), except in the following cases:- Cleaning on arrival:1st: Performed when the top cover is closed after the print head and ink tanks are installed.2nd: Performed before automatic print head alignment.3rd: Performed before start of printing after automatic print head alignment.- Manual cleaning / deep cleaning: Performed manually.Black: Pigment-based blackColor: Dye-based black, cyan, magenta, yellowPart 2: TECHNICAL REFERENCE TABLE OF CONTENTSCondition DetailsAmount of ink used(g)(in the normaltemperature/humidityenvironment)Est. requiredtime (sec.)(not includingthe time ofopening thecaps)On arrival of theprinter(All in sequence,except that blackonly for the 3rdcleaning)First to third cleaning after shipped fromthe plant*1 .0.53 (Black)2.223 (Color)90 for the 1stand 2nd cleaning(All in sequence)45 for the 3rdcleaning (Blackonly)Dot count cleaning(Black)When the specified number of dots areprinted since the previous Black cleaning.0.20 (Black) 40 (Black)Timer cleaning - 0 *2(Black only)If 24 to 504 hours have elapsed since theprevious Black cleaning till the start of thenext printing.0.20 (Black) 40 (Black)Timer cleaning - 1(Black/Color)If 504 to 720 hours have elapsed since theprevious Black/Color cleaning till the startof the next printing.0.20 (Black)0.53 (Color)40 (Black)45 (Color)Timer cleaning - 2(All in sequence)If 720 to 1,080 hours have elapsed sincethe previous Black/Color cleaning till thestart of the next printing.0.53 (Black)1.04 (Color)75Timer cleaning - 3(All in sequence)If 1,080 to 2,160 hours have elapsed sincethe previous Black/Color cleaning till thestart of the next printing.1.27 (Black)1.04 (Color)80Timer cleaning - 4(All in sequence)If 2,160 to 4,320 hours have elapsed sincethe previous Black/Color cleaning till thestart of the next printing.1.95 (Black)1.04 (Color)80Timer cleaning - 5(All in sequence)If 4,320 or longer hours have elapsed sincethe previous Black/Color cleaning till thestart of the next printing.1.95 (Black)1.04 (Color)80