printing on paper (printNOT continuable). [1856]Resume/Cancel button to clear the error. Thepaper being printed at error occurrence willbe ejected without printing the remainingdata for the ejected paper, then printing willresume from the next page.Inner cover closed beforestart of CD / DVDprinting (printcontinuable). [1850]Open the inner cover which functions as theCD / DVD tray feeder, set the CD / DVD trayin the feeder, and press the Resume/Cancelbutton.Inner cover closed duringCD / DVD printing (printNOT continuable). [1855]Open the inner cover, and press theResume/Cancel button to clear the error. TheCD or DVD being printed at error occurrencewill be ejected without printing the remainingdata for the ejected CD or DVD, then thenext print job will be performed.7 times Multiple ink tanks of thesame color installed.[1681]Replace the wrong ink tank(s) with thecorrect one(s).Ink tank in a wrongposition. [1680]Install the ink tank(s) in the correct position.8 times Warning: The inkabsorber becomes almostfull. [1700]Press the Resume/Cancel button. The service call error, indicating theink absorber is full, is likely to occursoon.9 times The connected digitalcamera or digital videocamera does not supportCamera DirectPrinting. [2001]Remove the cable between the camera andthe printer.10 times Automatic duplex printingcannot be performed.[1310]Press the Resume/Cancel button to eject thepaper being used at error occurrence. Printingwill resume from on the front side of the nextpage.Data which was to be printed on theback side of paper at erroroccurrence is skipped (not printed).11 times Failed in automatic printhead alignment. [2500]Press the Resume/Cancel button.- If paper is being fed at error occurrence, theerror is indicated after the paper is ejected.- If the error occurs, the print head alignmentvalues are not changed.- After exit from the error by theResume/Cancel button, the automatic printhead alignment will not be re-done.The error will occur (a) when theprint head alignment pattern is notprinted due to no ink or non-ejectionof ink, (b) when the sensor's ADvalue is incorrect, or (c) when thepaper is shorter than the specifiedlength.13 times The remaining ink amountunknown. [1683]Replace the applicable ink tank with a newone, and close the scanning unit (printercover).Printing with a once-empty ink tank candamage the printer.To continue printing without replacing theink tank(s), press the Resume/Cancel buttonfor 5 sec. or longer to disable the function todetect the remaining ink amount. After theoperation, it is recorded in the printerEEPROM that the function to detect theremaining ink amount was disabled.The error is indicated when raw inkis detected but the dot count numberexceeds the threshold of completeexhaustion of ink.14 times Ink tank not recognized.[1684]A non-supported ink tank is installed (the inktank LED is turned off). Install the supported