Canon PIXMA MX922 Setup Manual

Also see for MX920 series: Online manual Online manual Online manual Setup Online manual

Contents

Canon PIXMA MX922 Setup Manual Manual pdf 13 page image

Wired Connectiona Preparation for ConnectionBefore Starting Wired Connection Setup1. Make sure that the printer is turned on.If the power is on, a button on the Operation Panel (A) is lit.Notes on Wired ConnectionMake sure that the computer and router (A) are connected. For details on how to check the settings, refer to the manualsupplied with the router or contact its manufacturer.The confi guration, router functions, setup procedures and security settings of the network device vary depending on yoursystem environment. For details, refer to the manual of your network device or contact its manufacturer.For offi ce use, consult your network administrator.Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosingdata such as your personal information to a third party.This printer cannot be used over wireless and wired connections at the same time.When using a router, connect the printer and computer to the LAN side (same network segment).b Cable ConnectionYou will need an Ethernet cable (sold separately).1. Remove the Cap (A) of the second port from the top located on the left side at the back of the printer.••••••