Canon PIXMA MX512 Setup Manual

Also see for PIXMA MX512: Manual Specification Getting started guide Installation guide Setup guide

Contents

Canon PIXMA MX512 Setup Manual Manual pdf 2 page image

Network ConnectionWireless Connectiona Preparation for ConnectionBefore Starting Wireless Connection Setup1. Make sure that the printer is turned on.If the power is on, the lamp on one of the mode buttons (A) will be lit.Notes on Wireless ConnectionMake sure that the computer is connected to the access point (A) (or wireless network router) you want to connect yourprinter to.The confi guration, router functions, setup procedures and security settings of the network device vary depending on yoursystem environment. For details, refer to the manual of your network device or contact its manufacturer.Check if your device supports IEEE802.11n, 802.11g or 802.11b.If your device is set to the "IEEE802.11 n only" mode, WEP or TKIP cannot be used as a security protocol. Change thesecurity protocol for your device to something other than WEP and TKIP or change the setting to something other than"IEEE802.11 n only."For offi ce use, consult your network administrator.Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosingdata such as your personal information to a third party.This printer cannot be used over wireless and wired connections at the same time.An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without anaccess point, is not supported. Be sure to prepare an access point.b Printer Setup1. Press the MENU button (A) on the printer.••••••••