Canon PIXMA MP620 Series Getting Started

Also see for PIXMA MP620 series: Supplementary guide On-screen manual Manual Manual Manual

Contents

Canon PIXMA MP620 Series Getting Started Manual pdf 12 page image

05Quit all running applications before installation.Log into a user account with the administrator privilege.Do not switch user accounts during installation.It may be necessary to restart your computer during the installation process.Follow the on-screen instructions and click OK, and do not remove the Setup CD-ROM during restarting. The installation resumes from where it left off when yourcomputer has been restarted.Since Mac OS 9, Mac OS X Classic environments, Mac OS X v.10.3.8 or earlierare not supported.•••••Preparation for Setup■Ad-hoc mode is not supported.If you connect to a network that is not protected with security measures, there isa risk of disclosing data such as your personal information to a third party.The machine may communicate with other access points used in the vicinity.The machine supports WPS (Wi-Fi Protected Setup) and WCN (WindowsConnect Now) in addition to the conventional wireless LAN settings. As for WCN,"WCN-UFD" that requires a USB flash drive is supported.••••Notes on Wireless LAN Connection□A router and LAN cable are required to connect the machine to a wired LAN.These must be purchased separately.•Note on Wired LAN Connection□To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk, and setting configuredaccording to the connection method. In addition, configure the machine's LAN settings to connect to the network. Read the following carefully before starting setup.The screens below are based on Windows Vista operating system Ultimate Edition (hereafter referred to as "Windows Vista") and Mac OS X v.10.5.x.Notes on Setup□Before connecting the machine to the network, confirm that configuration of thecomputer and network devices (router, access point, etc.) complete, and that thecomputer can connect to the network.For information on how to confirm the settings of the access point, refer to youraccess point's instruction manual or contact its manufacturer. For example,Disable Stealth (closed network) functionConfirm MAC addressDisable the access point's IP address••–––Notes on Network Connection□The configuration, router functions, setup procedures and security functions ofthe network device vary depending on your environment. For details, refer to yourdevice’s instruction manual or contact its manufacturer.If the firewall function of your security software is turned on the warning messagemay appear that Canon software is attempting to access the network.If the warning message appears, set the security software to always allow access.In an office setup, consult your network administrator.If a screen not specified in the procedure or an error message appears duringsetup, refer to “5 The following screen is displayed during setup” in the printedmanual: Network Setup Troubleshooting.••••