Canon PIXMA MP520 Quick Start Manual

Also see for PIXMA MP520: Supplementary guide Brochure & specs Start here Quick start guide Quick start guide

Canon PIXMA MP520 Quick Start Manual Manual pdf 13 page image

9Loading Printing PaperENGLISHLoading Printing PaperThis machine offers two paper sources to load printing paper; the Rear Tray, found at the top of themachine, and the Front Tray, found at the front of the machine.Loading Printing Paper in the Rear Tray1 Open the Rear Tray, then pull out thePaper Support.2 Open the Front Tray.3 Extend the Output Paper Support.4 Press the Paper Feed Switch (A) so thatthe Rear Tray lamp (B) lights.5 Load the paper in the Rear Tray with theprint side facing UP.Do not load higher than the Load Limit Mark(C).6 Align the paper stack against the CoverGuide on the right side of the PaperSupport.7 Pinch the Paper Guide and slide it againstthe left side of the paper stack.Importantz When Printing for the first timeAt purchase, the machine is set to feed from the Rear Tray.If you are printing without changing paper source setting, load paper in the Rear Tray.z If you cut plain paper to 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x86.0 mm (credit card-size) for a trial print, it can cause paper jams.z Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paperto be jammed.(B)123(A)657(C)