14 Before Printing3 Load the paper.(1) Load the paper in the Auto Sheet Feeder withthe print side facing UP.(2) Align the paper stack against the Cover Guideon the right side of the Paper Support.(3) Pinch the Paper Guide and slide it against theleft side of the paper stack.z Loading Paper in the Front FeederYou can load A4, Letter, or B5-sized plain paper (such as Canon Super White Paper SW-201) in theFront Feeder. You cannot load any other paper in the Front Feeder.1 Flatten the four corners of the paper before loading it.See “Flatten the four corners of the paper before loading it.” on page 13.2 Prepare to load paper.(1) Open the Front Feeder.(2) Extend the Paper Output Support.(3) Press the Paper Feed Switch so that theFront Feeder lamp (A) lights.(4) Set the Paper Thickness Lever to the left.NoteMake sure that the Cover Guide is set upright whenyou load paper in the Auto Sheet Feeder.NoteWhen performing copy direct printing without using acomputer, press Settings to select the page size ofthe loaded paper. When using the machine connectedto a computer, select the page size of the loaded paperin Page Size in the printer driver.For details on printer driver settings, see “Printing withWindows” on page 22 or “Printing with Macintosh” onpage 23.NoteYou can also select the paper source with the printerdriver.For details, refer to the Printer Driver Guide on-screenmanual.(A)(1)(2)(3)Do not load higher than the Load LimitMark (A).(4)(1)(2)(3)(4)
