Canon PIXMA MP470 SERIES Start Here Manual

Also see for 2177B002 - Pixma MP470 Photo All-In-One Inkjet Printer: Quick start guide

Canon PIXMA MP470 SERIES Start Here Manual Manual pdf 1 page image

Start HereEasy Setup Instructionsa Unpack the Machine.Confirm the included items against the illustration printed on the lid of thepacking box.A USB cable is necessary to connect the machine with your computer.ImportantWhen moving the machine, carry the machine at both ends as shown below. Donot lift the machine by grasping the Paper Support Extension.b Place the machine on a flat and horizontal surface, and do notplace any objects in front of the machine.Remove all the shipping tapes and protective material on the outside of themachine. Then open the Paper Output Tray.c Lift the Scanning Unit (Printer Cover), and pull the Scanning UnitSupport down into place.Scanning Unit (Printer Cover)d Remove the protective material on the right side.Protective MaterialCautionBefore turning on the machine, remove all of the shipping tapes.e Lift the Scanning Unit (Printer Cover) slightly to set the ScanningUnit Support back to its original position, and then gently closethe Scanning Unit (Printer Cover).1 Prepare the Machinef Plug the power cord in the back of the machine and connect theother end to the wall outlet.Power CordDocument CoverImportantMake sure that the Document Cover is closed.Do NOT connect the USB cable at this stage.g Open the Operation Panel, then press the ON/OFF button to turnon the machine. The machine will initialize. Wait until the Powerlamp stops flashing and remains lit green.h Use the { or } button on the Operation Panel to select thelanguage for the LCD, then press the OK button.(1) Press the { or } buttonto select the language.(2) Press the OK button.ImportantIf an unintended language is displayed on the LCD, press the Back button to returnto the Language selection screen.Once the message “Set the ink cartridge.” appears, go to i.i Lift the Scanning Unit (Printer Cover), and pull the ScanningUnit Support down into place. The FINE Cartridge Holderautomatically moves to the left.j Write down the serial number located inside of the machine. Youwill need this to register your product.Serial Number••2 Install the FINE Cartridgesa Remove the Black FINE Cartridge from its box.b Remove the protective tape gently.Protective TapePrint Head NozzlesElectrical ContactsImportantDo not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge.The machine may not print out properly if you touch it.Do not drop or shake FINE Cartridges as this may cause the ink to leak out andstain your clothes and hands.Do not reattach the protective tape once you have removed it.Be careful not to stain your hands or surrounding work area with ink on theremoved protective tape.c Insert the Black FINE Cartridge slightly slanted into the leftslot B .Make sure that the procedure for installing the FINE Cartridges is displayed onthe LCD and the FINE Cartridge Holder has moved to the left.FINE Cartridge Holder••••d Push up the FINE Cartridge until it clicks into place.ImportantFor correct machine operation, make sure the FINE Cartridge is securely inserted.Clicke Repeat the procedure for the Color FINE Cartridge, inserting itinto the right slot C .f Lift the Scanning Unit (Printer Cover) slightly to set the ScanningUnit Support back to its original position, and then gently closethe Scanning Unit (Printer Cover).ImportantOnce you have installed the FINE Cartridges, the message “Processing... Pleasewait momentarily.” is displayed on the LCD. Wait until the copy standby screen isdisplayed before proceeding. It takes about one minute.Hardware setup is now complete.Next, turn over and install the software.Photo All-in-OneImportantWhen cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Machine” in the Quick Start Guide.

/ 2

Related manuals for Canon 2177B002 - Pixma MP470 Photo All-In-One Inkjet Printer