Canon Optura Pi Software Starter Manual

Also see for Optura Pi: User guide Instruction manual Install guide Brochure Product guide

Canon Optura Pi Software Starter Manual Manual pdf 12 page image

Read This First10Before You Connect the Camera to the ComputerPrecautions for Connecting the Camera to the Computer• The connection may not operate correctly if you attach the camera to the computer with aninterface cable via a USB hub.• The connection may not operate correctly if you are using other USB devices, excluding USBmice or keyboards, at the same time as the camera. If this occurs, disconnect the otherdevices from the computer and try reconnecting the camera.• Do not connect two or more cameras at the same time to the same computer. Theconnections may not operate correctly.• Never allow the computer to go into standby (sleep) mode while a camera is connected viathe USB interface cable. If it does happen, never disconnect the interface cable. Try to awakenthe computer with the camera in the connected state. Some computers will not awakenproperly if you disconnect the camera while they are in standby (sleep) mode. Please refer toyour computer manual for instructions regarding the standby (sleep) mode.Ensure that you have installed the software from the supplied Canon DigitalCamera Solution Disk before you connect the camera to the computer.• You are recommended to power the camera from a household power source(AC adapter) when connecting to a computer (if available for your cameramodel). Ensure that you use fully charged batteries if you will not be using ahousehold power source.• See the Camera User Guide for procedures connecting the camera to thecomputer.