CHAPTER 3 EXPOSURE SYSTEMCOPYRIGHT © 1999 CANON INC. CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 3-151. Detaching the Lens Cable1) Detach the copyboard cover, copyboardglass, lens cover, rear cover, and upperrear cover.2) Remove the three screws [1] shown inFigure 3-402, and detach the upper frame.3) Mark the position of the pulley mount andthe cable mount using a scriber; see Fig-ure 3-401.4) Remove the two screws [2] that hold thepulley mount [3] in place; see Figure 3-403.5) Detach the cable (cable mount).2. Routing the Lens Cable1) Remove the two screws that hold the lenspulley fixing plate in place, and detach thelens pulley; see Figure 3-401.2) Wind the lens cable around the lens pulleyas shown in Figure 3-401; then, fix it us-ing two screws.3) Shift the pulley mount to the positionmarked with a scriber, and fix it in placeusing two screws.Figure 3-402Figure 3-403[1][3][2]Download Service Manual And Resetter Printer at http://printer1.blogspot.com
